Stop It! You Need Good Brakes

August 25th, 2010 by super558

Good brakes are obviously very important. If you’ve ever had your brakes go out while you’re driving around the Ft Collins area, you’ll know how terrifying it can be. Today we’ll focus on how to tell when you have a brake problem, and how to make good repair choices.

Often, the first indication that something’s wrong with the brakes is an unusual sound. It could be a squeal, chatter or grinding sound.

Some brake pads have a little piece of metal embedded in them that will make a squeal or chirping sound when the brake pads have been worn down to the point that they need to be replaced. It’s an early warning indicator.

When you hear that sound, schedule an appointment at Advantage Automotive Inc. soon.

Now a chattering sound is more urgent. That usually indicates that something is loose. It could be a brake pad or even the brake calipers. If one of those parts falls off, you could have some serious trouble stopping the vehicle. It would be a good idea to park it until you can get into the shop.

A grinding noise usually means that the brake pad is completely worn away and the metal parts of the brake are rubbing directly on the metal brake rotor. That means the rotor is being damaged and will need some work. More on that later.

Another warning sign is that your brake pedal may feel soft and spongy – or it may even feel very hard to push in. Both could mean trouble. And of course, you may get a dashboard brake warning light.

Now when it comes time to replace your brake pads, you have a choice to make. You can get the same pads that came standard on your vehicle. You can expect the same performance and durability as with the pads that came on the car from the factory.

Now you can also get a budget brake pad. Sometimes drivers insist on lower cost pads. That’s OK if the budget demands it, but you need to be aware of the trade offs. Lower grade pads are usually noisier, so you’ll have to live with more noise when you apply the brakes. They also tend to generate a lot more brake dust, you know, that black dust that accumulates on your wheels. And they probably won’t last as long either. In our opinion, that’s a lot of compromise for just a few dollars in savings.

You can also choose to buy premium brakes pads. These perform at higher specifications than the factory pads. You can expect quieter operation, less brake dust and better stopping power.

Now, getting back to the rotors. The rotors are the discs that the brake pads clamp down on to stop the vehicle. If you’ve been driving with completely worn brake pads, you’ve scratched grooves into the rotors. If the grooves aren’t too deep, the rotor can be resurfaced. A thin layer of metal is cut off the surface of the rotor to make it smooth again.

Now, if the grooves are too deep or if the rotor has already be resurfaced before, there may not be enough material to resurface and still have a rotor that’s thick enough to safely stop the vehicle. In that case, the rotor will have to be replaced.

Something that’s often overlooked is the brake fluid. Your manufacturer has a recommended schedule for evacuating the old brake fluid, cleaning the system and refilling it with fresh brake fluid. This is really important to brake performance.

So here’s the bottom line: if you suspect, inspect. If you notice any of these warning signs, have your brakes inspected. Your advisor can help you make the repair decision that’s right for you.

  • Share/Bookmark

Posted in Brakes | No Comments »

Fuel Filter Service in Loveland CO

August 19th, 2010 by super558

There are a surprising number of small, inexpensive parts that can lead to expensive engine damage when they fail. It doesn’t seem right.

Fortunately a lot of those things can be taken care of in routine maintenance. They may not be easy to remember, because it is a long list, but your service center at Advantage Automotive Inc. can help you know what’s scheduled to be taken care of.

Some of us in Loveland CO really don’t look forward to going in for an oil change and then getting a list of the other things the manufacturer recommends.

But automotive maintenance is all about prevention, and addressing small problems before they get big. Let’s take the fuel filter for example.

You may not know this but the median age for private vehicles on our Loveland CO roads is over nine years. When cars get older, five years or so, they’ve accumulated a lot of dirt and rust in their gas tanks. If that dirt gets into the engine it can cause thousands of dollars worth of damage. So somewhere between that dirty gas tank and the price of a great vacation – is the lowly fuel filter: a very inexpensive part that doesn’t cost too much to replace. And your car’ll just run better too.

A clogged fuel filter can’t let enough fuel through. You might notice at first that your car is running fine around town, but struggles or sputters on the Loveland CO freeway or when you accelerate. Enough fuel can’t get through to meet the demands of higher speed. If it gets bad enough your engine might just shut off or not start at all, which could be dangerous.

Some fuel filters have a bypass. When they get clogged, they allow dirty fuel to move around the filter element so dirt ends up in the engine. We’ve already talked about how expensive that can be.

The fuel filter is even very important for newer cars. The fuel is still dirty even if there isn’t rust in the tank. It’s just that the fuel filter will need to be changed more frequently as the vehicle gets older.

How often should you change your fuel filter? Check your owner’s manual. Your Loveland CO service advisor at Advantage Automotive Inc. can tell you as well. It’s usually around thirty thousand miles or so. Ask if it’s time for a full fuel system cleaning as well. They often go hand in hand.

It’s good to know that your Loveland CO service center has your back. When you’re motivated to maintain your vehicle’s performance and to reduce operating costs, you’ll think of Advantage Automotive Inc. as your ally – and maybe even your memory.

  • Share/Bookmark

Posted in Fuel System | No Comments »

When Are Your Tires Worn Out?

August 11th, 2010 by super558

Hey Ft Collins, are your tires worn out? What is the standard for our CO streets? How can you tell on your SUV?

While there may be legal requirements for the Ft Collins area, there are safety concerns that go beyond meeting minimum replacement mandates.

2/32 is the depth of the tire tread wear indicator bars that US law has required to be molded across all tires since August 1, 1968. When tires are worn so that this bar is visible, there’s just 2/32 of an inch – 1.6 millimeters – of tread left. It’s that level of wear that’s been called into question recently.

We’re referring to the Consumer Reports call to consider replacing tires when tread reaches 4/32 of an inch, or 3.2 millimeters. And the recommendation is backed by some very compelling studies.

The issue is braking on wet surfaces in and around Ft Collins. Most of us think of our brakes doing most of the work, but if you don’t have enough tread on your tires, the brakes can’t do their job. When it’s wet or snowy, the tread of the tire is even more critical to stopping power.

Picture this: you’re driving over a water covered stretch of road near Ft Collins, CO. Your tires must be in contact with the road in order to stop. That means that the tire has to move the water away from the tire so that the tire is actually contacting the road and not floating on a thin film of water.

Floating on the surface of water is called hydroplaning. So if there’s not enough tread depth on a tire, it can’t move the water out of the way and you start to hydroplane.

In the study a section of a test track was flooded with a thin layer of water. If you laid a dime on the track, the water would be deep enough to surround the coin, but not enough to cover it.

A car and a full-sized pick-up were brought up to 70 miles per hour, or 112 kilometers an hour and then made a hard stop in the wet test area. Stopping distance and time were measured for three different tire depths:

  • New tire tread depth
  • 4/32 of an inch
  • 2/32 of an inch

So what happened with the 2/32 tires on the car? Get this – when the car had traveled the distance required to stop with new tires, it was still going 55 miles an hour. Stopping distance was nearly doubled to 379 feet and it took 5.9 seconds.

Wow! That means if you barely have room to stop with new tires, you would hit the car in front of you at 55 miles an hour with the worn tires.

Now, with the partially worn tires – at 4/32 of an inch – the car was still going at 45 miles an hour at the point where new tires brought the car to a halt. It took nearly 100 feet more room to stop and 1.2 seconds longer. That’s a big improvement. We can see why Consumer Reports and others are calling for a new standard.

Of course, stopping distances were greater for the heavier pick-up truck.

How do you know when your tires are at 4/32 of an inch? Easy; just insert a quarter into the tread. Put it in upside down. If the tread doesn’t cover George Washington’s hairline, it’s time to replace your tires. With a Canadian quarter, the tread should cover the numbers in the year stamp.

You may remember doing that with pennies. A penny gives you 2/32 to Abraham Lincoln’s head. The quarter is the new recommendation – 4/32.

How do people feel about replacing their tires earlier? Well, tires are a big ticket item and most people want to get the most wear out of them that they can. But do you want that much more risk just to run your tires until they are legally worn out?

For us, and we would guess for many, the answer is “no”.

Advantage Automotive Inc.
3216 N Garfield Ave
Loveland, CO 80538
970-663-5399

  • Share/Bookmark

Posted in Tires and Wheels | No Comments »

On Board Diagnostics For Your SUV

August 6th, 2010 by super558

Make an appointment with Advantage Automotive Inc. to have your on board diagnostics analyzed.
3216 N Garfield Ave
Loveland, CO 80538
970-663-5399

Today we’re going to talk about on-board diagnostics and the questions we hear from folks around Loveland CO who need answers about diagnostic services. They want to know what diagnostics are, what’s involved and what the benefits are. They really want to understand the value of diagnostic scans by a trained technician in Loveland CO.

These are valid concerns. If you don’t understand something it’s really hard to know its value. Let’s start with some history.

Since 1996, all cars and light trucks in Loveland CO have been required to use a standardized diagnostic system to help repair technicians determine what’s wrong with your vehicle. The diagnostic system works with the vehicle’s Engine Control Module – the computer that controls many engine functions.

The computer monitors dozens of components and processes. Depending on what the sensors read, the computer will make adjustments to compensate for conditions and minor problems. When there is a condition that it can’t adjust for, the computer will turn on the check engine light.

It is also called the ’service engine soon’ light on some vehicles. The warning light signals you to get into your Loveland CO service center so that the trouble code can be read and the problem can be fixed. Your service center will have a scan tool and powerful software that will help the technician diagnose the problem.

If you’ve searched for check engine light on the internet, you may have seen that you can buy an inexpensive scanner or go to an auto parts store to have the trouble code read to tell you exactly what’s wrong.

That’s a common myth. The code itself doesn’t tell you what’s broken. It starts you looking in the right place. It tells you what engine parameter is out of range – but it won’t tell you what’s wrong or how to fix it.

Let’s say you think your daughter has a fever. You take her temperature and it reads one 102 degrees. You’ve confirmed a fever, but you don’t know what’s causing it. Is it a 24 hour flu, an infection, appendicitis or leukemia? A fever is a symptom of all of these medical problems, but it takes a skilled physician’s examination and additional diagnostic tests to find out what is actually causing the fever.

An example of a trouble code could be: P0133, which reads ‘Bank 1 sensor 1 circuit slow response’. This means that the front oxygen sensor has a slow response time to changes in the air-fuel mix. If that’s all you knew about cars, you would think your oxygen sensor was broken and would replace it. Now, it could be the oxygen sensor – but it could also be a bad or contaminated airflow sensor, exhaust leak, electrical problem, an intake manifold leak or any of a number of other things.

You can imagine a lot of oxygen sensors have been replaced because of that code. So the on-board diagnostics point the way to where the trouble lies, but it takes some skill and high-tech equipment to actually pinpoint the problem. The cheap scan tools that a consumer can buy do not have the ability to retrieve some of the operating history that’s stored in the engine control computer. That history’s very helpful in diagnosing the problem. Service centers like Advantage Automotive Inc. invest a lot of money in high-end diagnostic tools to help solve the mystery and get you back on the road as soon as possible without replacing a lot of parts that don’t need replacing.

So, on-board diagnostics provide a powerful starting place for a highly-trained, well-equipped technician to get to the bottom of your problem. When your check engine light comes on, get it checked at Advantage Automotive Inc.. If the light burns steady – don’t panic. Get in to Advantage Automotive Inc. soon to have the engine scanned. A flashing check engine light means that there is a severe engine problem. Get in as soon as you can – waiting too long can lead to very expensive damage.

And try to not drive at high speed or tow or haul heavy loads with a flashing check engine light.

  • Share/Bookmark

Posted in Service Standards | No Comments »

Looking Down the Road – Headlamps

July 29th, 2010 by super558

If you’ve ever been driving around Loveland and had a headlamp go out, you’ve probably just wanted to replace the bad bulb. If your car uses halogen headlamps, they dim over time. So if you just put in one, they won’t have the same brightness which can be distracting and will affect your field of vision.

To have your headlights inspected, visit us at Advantage Automotive Inc.. We’re at 3216 N Garfield Ave in Loveland, CO 80538. Or give us a call at 970-663-5399

Experts in Loveland recommend replacing your halogen headlamps every year. It’s easy to remember if you do it when daylight savings time changes in the fall. That way you’ll have bright headlamps for those long Loveland winter nights.

There are other types of headlamps in addition to halogen. There are the old standard bulbs that have been around for decades. These are OK, but you can usually upgrade to halogen. They cost a little more but you can’t believe the difference. If you do a lot of night driving you might want to use a premium halogen bulb that filters out the yellow hues and give a very white light that’s a lot like daylight.

You may have noticed those bluish headlights on luxury cars. They are high intensity discharge or, HID lamps. They really light up the road. You can upgrade to HID on some vehicles. These cost quite a bit, but they’ll last for the life of your car. If you want your Loveland friends to think you have HIDs, you can get halogens with a bluish tint – no one needs to know.

Seriously, though, night driving is all about reaction time – time to stop – time to get out of the way. You can’t react to what you can’t see. You need headlamps that’ll give you a good view down the road and good peripheral vision as well. And your headlights need to be aimed correctly so you can see and also, to keep your lights from shining off into on-coming traffic.

You may have seen older vehicles with headlights that are awfully dim and maybe even yellow. That’s because the plastic headlight lenses have gotten cloudy and yellowed with age. They can be replaced, but many Loveland service centers offer a service to restore the lens that’s a lot cheaper.

You can’t drive if you can’t see. AAA reports that nine out of ten vehicles have dirty or yellowed headlamps. So run the window squeegee over your headlights when you gas up to clear the dirt and bugs. Get your lenses restored if they need it and don’t forget to replace your standard or halogen bulbs every fall.

  • Share/Bookmark

Posted in Maintenance | No Comments »

Economics of Maintenance For Loveland Auto Owners

July 27th, 2010 by super558

Buying a new car in Loveland is always a big financial decision. The allure of that new car smell is powerful, to be sure. But what if your current car is still in good shape? How do you decide?

People in Loveland who’ve been used to driving a new car every three to five years may be having second thoughts in this economy. For many, the question is, how does the certainty of a new car payment stack up against uncertain repairs for a car that may be out of warranty?

For purposes of our discussion, let’s assume you live right here in Loveland and have a five year old vehicle. It’s now paid off. If you keep it, you fear that there’ll be some repairs over the next five years, but you really don’t know what to expect. For help we turned to Edmunds.com.

Edmunds.com has compiled maintenance and repair information for cars and trucks. With this data, they project likely service and repair costs for a particular make and model. They’re able to use manufacturer’s maintenance schedules and repair histories for the projections.

Of course, these projections can’t predict what will happen to your vehicle in Loveland, but they do give you information to use in your decision.

Let’s look at the numbers for a five year old Toyota Camry V-6. In this example, the combined maintenance and repairs for the five year period is $5,748. This works out to an average of $96 a month. The year-by-year averages range from a low of $49 a month to $124 a month.

So compare $96 a month with a new car payment. And it’s actually better news than that; you would still have maintenance expenses with a new car, so the repair element could be less than half that figure.

Here are numbers for some other five year old vehicles from around Loveland:

  • Ford Escape – $116 a month
  • Chevy Silverado – $131 a month
  • Jeep Grand Cherokee – $138 a month
  • Hyundai Accent – $85 a month.

Now, if your vehicle is older than five years, have a chat with your Loveland service advisor at Advantage Automotive Inc.. We see hundreds of vehicles through our bays every month and we know your car. See if there’s any particular problem common with your vehicle that you might see over the next couple of years.

And of course, the best way to keep future repair costs down is to take care of all your scheduled maintenance. This is especially important in older vehicles that have had time to accumulate some deposits.

There are special motor oil formulations that help clean older engines and protect and recondition their seals and gaskets.

We hope this eliminates some of the unknowns in the decision to keep or trade.

Give us a call if you have any questions:
Advantage Automotive Inc.
3216 N Garfield Ave
Loveland, CO 80538
970-663-5399

  • Share/Bookmark

Posted in Maintenance | No Comments »

Ethics of Automotive Repair in Loveland

July 15th, 2010 by super558

We’re going to be talking about the ethics of automotive repair. It seems like news outlets really like hit-and-run reporting; they hit everyone from groceries stores to retail to physicians. And the Loveland automotive service and repair industry hasn’t been given a pass either.

Unfortunately, every profession in Loveland has some bad actors that hurt the reputation of everyone else. On the automotive side, industry associations and professional licensing organizations are very committed to high ethical standards.

Yet some people remain uncomfortable with Loveland automotive service and repair. It may start with the fact that our vehicles are a big investment and we rely on them for so much in our lives. That alone guarantees our attention. And how well we understand the recommendations really impacts our comfort level.

If we understand what’s recommended and the benefits of taking care of the work – and the pitfalls of putting it off – we’ll have more trust in the recommendation. So communication is key. It’s like going to the doctor; If she’s using medical jargon and takes a lot of basic medical knowledge for granted, we have a hard time following her train of thought. It can be like that with your Loveland service advisor too. He’s so familiar with all things automotive, he may forget you don’t know a PCV from an EGT.

If you don’t understand what your doctor’s talking about: ask some questions. If you don’t understand what your Loveland automotive advisor’s talking about: ask some questions.

Let’s go back to those ethical standards; when we hear a repair recommendation, we always ask ourselves, “Is this really necessary?” Well, here’s the industry standard:

If a technician tells you that a repair or replacement is required it must meet the following criteria:

  1. The part no longer performs its intended purpose
  2. The part does not meet a design specification
  3. The part is missing

For example, it you take your car in for a grinding noise when you step on the brakes, you may just think you need new brake pads. After the inspection, the technician at Advantage Automotive Inc. says that you have a cracked rotor and need to replace it.

If you tried to get him to simply put new pads on, he would say that if you didn’t want to replace the rotor; Advantage Automotive Inc. would ethically have to refuse the repair.

To just put pads on a cracked rotor would have been very wrong. The brakes could’ve failed at anytime and needed to be repaired – not just have a band-aid slapped on them.

Now, looking at something not so serious, the technician may suggest repair or replacement if:

  1. The part is close to the end of its useful life – just above discard specifications or likely to fail soon
  2. To address a customer need or request – like for better ride or increased performance
  3. To comply with maintenance recommended by the vehicle’s manufacturer
  4. Based on the technician’s informed experience

Of course, the technician has the burden of making ethical recommendations and properly educating their customers. For the customer, if you are uncomfortable with a recommendation, ask some questions. More information is always a good thing.

  • Share/Bookmark

Posted in Service Standards | No Comments »

Budgeting for Maintenance In Loveland CO

July 13th, 2010 by super558

Life’s full of surprises in Loveland CO, some of which cost money. A leaky roof, a broken tooth, or an unexpected car repair. Advantage Automotive Inc. of Loveland CO and AutoNetTV have done some research on how we can budget for proper vehicle care.

Everyone in Loveland CO does our best to budget for scheduled vehicle maintenance. What’s hard is unexpected repairs. The truth is that our vehicles can stay on the road longer than ever before with proper maintenance. That’s because of improved vehicle design and manufacturing quality. But some of those same improvements also lead to higher repairs costs.

Let’s take the fuel pump. Previous generations were often stranded by the side of the road by vapor lock. This occurred when the gas vaporized between the gas tank and the fuel pump. Fuel just stopped flowing.

You had to sit and wait until the car would start again. To alleviate the problem, fuel pumps are now located inside the gas tank. This is a great solution, but when the fuel pump fails, it’s a much more expensive proposition to replace it.

Sealed wheel bearing assemblies are another example. These wheel bearings can’t be serviced – you just have to replace the entire assembly when it starts to fail. That costs several times as much as service on non-sealed bearings.

So we all benefit in Loveland CO from design improvements, but we need to plan for repairs down the road.

There’s a tool that can be found on Edmunds.com that you can use to prepare your service and repair budget.

Let’s suppose you have a 2003 Toyota Camry – a very popular car in Loveland CO. It’s now paid for and you’d like to keep it running for the next three years. You can go to Edmunds’ True Cost to Own calculator and enter your vehicle’s data. The calculator will provide estimates of what it’ll cost to service and repair your vehicle over the next five years. The estimate is based on where you live in or near Loveland CO, manufacturers’ recommendations and repair experience for your particular model.

Of course these are just estimates – there’s no way to predict what’ll actually happen to the car in your driveway, but it’s a good starting point.

The calculator also has estimates for depreciation, financing, insurance, taxes and fuel costs.

Let’s focus on maintenance and repair. This table shows that the average monthly cost of maintenance and repairs is eighty-three dollars. That may sound like a lot, but compare it to a new car payment.

Budgeting for Maintenance

So if you set aside eighty-three dollars a month, you’d go a long ways towards taking care of routine maintenance and being prepared for the unexpected repairs that arise.

Of course, you can’t predict when something will go wrong or what it’ll cost, but at least you have a reasonable target to shoot for.

Some people around Loveland CO are afraid of what can go wrong with their older car so they buy a new one. That’s fine if you really want a new car, but if you properly maintain your older vehicle, you’ll save a lot of money on new car payments and insurance. It just makes good economic sense.

Get with your Loveland CO service advisor at Advantage Automotive Inc. and work out a plan for keeping your vehicle on the road.

You can visit Advantage Automotive Inc. at 3216 N Garfield Ave in Loveland, CO 80538 or just give us a call at 970-663-5399.

  • Share/Bookmark

Posted in Maintenance | No Comments »

How Your Check Engine Light Works

June 30th, 2010 by super558

Have you ever had an experience like this in Loveland CO? You drive through the one of those automatic car washes. When you get to the end, where the dryer is blowing, your check engine light started flashing!

You fear the worst, but within a block or two, the light stopped flashing, but stayed on. By the next day, the light was off.

You wonder; “What was going on?” Well, it’s actually a good lesson in how the Check Engine light works.

Your air intake system has a sensor that measures how much air is coming through it. When you went under the high-speed dryer, all that air was blasting past the sensor. Your engine computer was saying, there shouldn’t be that much air when the engine is just idling. Something’s wrong. Whatever’s wrong could cause some serious engine damage.

Warning, warning! It flashes the check engine light, to alert you to take immediate action.

It stopped flashing because once you were out from under the dryer, the airflow returned to normal. Now the engine control computer says the danger is past, but I’m still concerned, I’ll keep this light on for now.

Then the Check Engine Light goes off in a day or two.

The condition never did recur, so the computer says whatever it was, it’s gone now. The danger is past, I’ll turn that light off.

Now a flashing check engine light is serious. You need to get it into our Loveland CO shop as soon as possible. But if it stops flashing, so you have time to see if the problem will clear itself or if you need to get it checked. How does the computer know when to clear itself?

Think of it this way. The engine control computer is the brain that can make adjustments to manage the engine. Things like alter the air to fuel mix, spark advance, and so on. The computer relies on a series of sensors to get the information it needs to make decisions on what to do.

The computer knows what readings are in a normal range for various conditions. Get out of range, and it logs a trouble code and lights up the check engine warning.

The computer will then try to make adjustments if it can. If the computer can’t compensate for the problem, the check engine light stays on.

The computer logs a trouble code. Some people think the code will tell the technician exactly what’s wrong?

Actually, the code will tell the technician what sensor reading is out of parameters. It can’t really tell you why, because there could be any number of causes.

Let’s say you’re feeling hot. You get your heat sensor out – a thermometer – put it under our tongue and in a minute or two you learn that you have a fever of 104 degrees.

You know your symptom – a fever – but you don’t know what’s causing it. Is it the flu, a sinus infection or appendicitis?

You need more information than just that one sensor reading. But it does give you a place to start and narrows down the possible problems.

There are reports on the internet telling you that you can just go down to an auto parts store and get them to read your trouble code or buy a cheap scan tool to do it yourself.

There are two problems with that. First, the computer stores some trouble codes in short term memory, and some in permanent memory. Each manufacturer’s computer stores generic trouble codes, but they also store codes that are specific to their brand.

A cheap, generic scan tool, like you can buy or that the auto parts store uses, doesn’t have the ability to retrieve long-term storage or manufacturer specific codes. Your Loveland CO service center has spent a lot of money on high-end scan tools and software to do a deep retrieval of information from your engine control computer.

The second problem is that once you’ve got the information, do you know what to do with it? For example, a very common trouble code comes up when the reading on the oxygen sensor is out of whack.

So the common solution is for the auto parts store to sell you a new oxygen sensor, which are not cheap, and send you off on your way. Now your oxygen sensor may indeed have been bad and needed replacing. But the error code could have come from any of a dozen of other problems.

How do you know the right solution? Back to the fever analogy, do you need surgery or an aspirin? Leave it to the pros at Advantage Automotive Inc.. Give us a call at 970-663-5399 and let us help you resolve your check engine light issue.

  • Share/Bookmark

Posted in Dashboard | No Comments »

Wheel Bearings

June 23rd, 2010 by super558

Let me start by saying that your wheel bearings keep the wheels on your vehicle. Did that get your attention? In this article we’ll discuss more about wheel bearings and how you can keep them doing their very important job while you drive around Berthoud CO.

Come see us at: 3216 N Garfield Ave Loveland, CO 80538

Wheel bearings are pretty simple parts. They’re made of high quality steel and are engineered to last 100,000 miles or more if properly cared for. The bearings do two very important jobs: First they allow the wheel to freely rotate with as little friction as possible. Second, they support the weight of the vehicle. For example, if your car weighs 3,600 pounds, each wheel has to support approximately 900 pounds. That’s a lot of heavy lifting over many, many thousands of miles.

Even though wheel bearings are relatively simple, they need to be in near perfect condition to do their job. The bearings are packed with heavy grease to lubricate and protect them. A seal keeps the grease in and water and dirt out. It’s when the seal starts to leak that problems begin. The grease can become contaminated; causing the wheel bearings to overheat and ultimately fail.

The first sign that your wheel bearings are in trouble is an unusual noise coming from a wheel. It could be a chirping, growling, rumbling or a cyclic sound. The noise could get louder or even disappear at certain speeds. Your technician at Advantage Automotive Inc. can inspect for bearing wear by lifting the vehicle and checking for play in the wheel.

Now some wheel bearing assemblies are factory sealed. That means that they cannot be serviced – they can only be replaced. Those that aren’t sealed can be serviced on schedule. The bearings are removed, cleaned and inspected. If the bearings are still good, they’re re-installed – if not, they’re replaced. They are then packed in grease and a new seal is installed.

If your vehicle has a factory sealed wheel bearing assembly, the entire assembly needs to be replaced when trouble arises. Unfortunately, the parts are pretty pricy – but they usually last about 150,000 miles as long as the seals hold up.

Now, even a good seal cannot keep out water that’s exerting pressure on the seal. So if you’ve driven through hub deep water your bearings should be cleaned and repacked if they’re serviceable. If you have factory sealed bearings, you just need to watch for signs of premature failure.

If your wheel bearings can be serviced, your owner’s manual will recommend an interval, usually around 30,000 miles.

Now, if you have any sort of trailer, don’t forget its wheel bearings. They probably need to be serviced even more frequently. This is especially true for boat trailers that are used to launch the boat by backing it into the water. These should be serviced every year, usually at the end of the season so that the bearings don’t have the opportunity to sit and rust all winter.

So what happens if wheel bearings fail? Well, the wheel can literally fall off the vehicle. I don’t need to tell you how bad that could be. So check with your service advisor at Advantage Automotive Inc. and see if your vehicle’s wheel bearings can be serviced and when it’s recommended. Listen for warning signs. If you’ve been fording streams or puddle surfing after rainstorms, be especially vigilant.

Come by Advantage Automotive Inc. for a wheel bearing inspection, or for brake service. Call for an appointment at 970-663-5399

  • Share/Bookmark

Posted in Tires and Wheels | No Comments »

« Older Entries